From c059e3aa7f93da470f052a5cd8ee0d8dc969e679 Mon Sep 17 00:00:00 2001 From: Berke Güzel Date: Tue, 13 Oct 2026 13:44:13 +0300 Subject: rename and simplification --- src/wayland/protocols/viewporter-client-protocol.h | 394 --------------------- 1 file changed, 394 deletions(-) delete mode 100644 src/wayland/protocols/viewporter-client-protocol.h (limited to 'src/wayland/protocols/viewporter-client-protocol.h') diff --git a/src/wayland/protocols/viewporter-client-protocol.h b/src/wayland/protocols/viewporter-client-protocol.h deleted file mode 100644 index a7818d3..0000000 --- a/src/wayland/protocols/viewporter-client-protocol.h +++ /dev/null @@ -1,394 +0,0 @@ -/* Generated by wayland-scanner 1.26.0 */ - -#ifndef VIEWPORTER_CLIENT_PROTOCOL_H -#define VIEWPORTER_CLIENT_PROTOCOL_H - -#include -#include -#include "wayland-client.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @page page_viewporter The viewporter protocol - * @section page_ifaces_viewporter Interfaces - * - @subpage page_iface_wp_viewporter - surface cropping and scaling - * - @subpage page_iface_wp_viewport - crop and scale interface to a wl_surface - * @section page_copyright_viewporter Copyright - * 
- *
- * Copyright © 2013-2016 Collabora, Ltd.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- */ -struct wl_surface; -struct wp_viewport; -struct wp_viewporter; - -#ifndef WP_VIEWPORTER_INTERFACE -#define WP_VIEWPORTER_INTERFACE -/** - * @page page_iface_wp_viewporter wp_viewporter - * @section page_iface_wp_viewporter_desc Description - * - * The global interface exposing surface cropping and scaling - * capabilities is used to instantiate an interface extension for a - * wl_surface object. This extended interface will then allow - * cropping and scaling the surface contents, effectively - * disconnecting the direct relationship between the buffer and the - * surface size. - * @section page_iface_wp_viewporter_api API - * See @ref iface_wp_viewporter. - */ -/** - * @defgroup iface_wp_viewporter The wp_viewporter interface - * - * The global interface exposing surface cropping and scaling - * capabilities is used to instantiate an interface extension for a - * wl_surface object. This extended interface will then allow - * cropping and scaling the surface contents, effectively - * disconnecting the direct relationship between the buffer and the - * surface size. - */ -extern const struct wl_interface wp_viewporter_interface; -#endif -#ifndef WP_VIEWPORT_INTERFACE -#define WP_VIEWPORT_INTERFACE -/** - * @page page_iface_wp_viewport wp_viewport - * @section page_iface_wp_viewport_desc Description - * - * An additional interface to a wl_surface object, which allows the - * client to specify the cropping and scaling of the surface - * contents. - * - * This interface works with two concepts: the source rectangle (src_x, - * src_y, src_width, src_height), and the destination size (dst_width, - * dst_height). The contents of the source rectangle are scaled to the - * destination size, and content outside the source rectangle is ignored. - * This state is double-buffered, see wl_surface.commit. - * - * The two parts of crop and scale state are independent: the source - * rectangle, and the destination size. Initially both are unset, that - * is, no scaling is applied. The whole of the current wl_buffer is - * used as the source, and the surface size is as defined in - * wl_surface.attach. - * - * If the destination size is set, it causes the surface size to become - * dst_width, dst_height. The source (rectangle) is scaled to exactly - * this size. This overrides whatever the attached wl_buffer size is, - * unless the wl_buffer is NULL. If the wl_buffer is NULL, the surface - * has no content and therefore no size. Otherwise, the size is always - * at least 1x1 in surface local coordinates. - * - * If the source rectangle is set, it defines what area of the wl_buffer is - * taken as the source. If the source rectangle is set and the destination - * size is not set, then src_width and src_height must be integers, and the - * surface size becomes the source rectangle size. This results in cropping - * without scaling. If src_width or src_height are not integers and - * destination size is not set, the bad_size protocol error is raised when - * the surface state is applied. - * - * The coordinate transformations from buffer pixel coordinates up to - * the surface-local coordinates happen in the following order: - * 1. buffer_transform (wl_surface.set_buffer_transform) - * 2. buffer_scale (wl_surface.set_buffer_scale) - * 3. crop and scale (wp_viewport.set*) - * This means, that the source rectangle coordinates of crop and scale - * are given in the coordinates after the buffer transform and scale, - * i.e. in the coordinates that would be the surface-local coordinates - * if the crop and scale was not applied. - * - * If src_x or src_y are negative, the bad_value protocol error is raised. - * Otherwise, if the source rectangle is partially or completely outside of - * the non-NULL wl_buffer, then the out_of_buffer protocol error is raised - * when the surface state is applied. A NULL wl_buffer does not raise the - * out_of_buffer error. - * - * If the wl_surface associated with the wp_viewport is destroyed, - * all wp_viewport requests except 'destroy' raise the protocol error - * no_surface. - * - * If the wp_viewport object is destroyed, the crop and scale - * state is removed from the wl_surface. The change will be applied - * on the next wl_surface.commit. - * @section page_iface_wp_viewport_api API - * See @ref iface_wp_viewport. - */ -/** - * @defgroup iface_wp_viewport The wp_viewport interface - * - * An additional interface to a wl_surface object, which allows the - * client to specify the cropping and scaling of the surface - * contents. - * - * This interface works with two concepts: the source rectangle (src_x, - * src_y, src_width, src_height), and the destination size (dst_width, - * dst_height). The contents of the source rectangle are scaled to the - * destination size, and content outside the source rectangle is ignored. - * This state is double-buffered, see wl_surface.commit. - * - * The two parts of crop and scale state are independent: the source - * rectangle, and the destination size. Initially both are unset, that - * is, no scaling is applied. The whole of the current wl_buffer is - * used as the source, and the surface size is as defined in - * wl_surface.attach. - * - * If the destination size is set, it causes the surface size to become - * dst_width, dst_height. The source (rectangle) is scaled to exactly - * this size. This overrides whatever the attached wl_buffer size is, - * unless the wl_buffer is NULL. If the wl_buffer is NULL, the surface - * has no content and therefore no size. Otherwise, the size is always - * at least 1x1 in surface local coordinates. - * - * If the source rectangle is set, it defines what area of the wl_buffer is - * taken as the source. If the source rectangle is set and the destination - * size is not set, then src_width and src_height must be integers, and the - * surface size becomes the source rectangle size. This results in cropping - * without scaling. If src_width or src_height are not integers and - * destination size is not set, the bad_size protocol error is raised when - * the surface state is applied. - * - * The coordinate transformations from buffer pixel coordinates up to - * the surface-local coordinates happen in the following order: - * 1. buffer_transform (wl_surface.set_buffer_transform) - * 2. buffer_scale (wl_surface.set_buffer_scale) - * 3. crop and scale (wp_viewport.set*) - * This means, that the source rectangle coordinates of crop and scale - * are given in the coordinates after the buffer transform and scale, - * i.e. in the coordinates that would be the surface-local coordinates - * if the crop and scale was not applied. - * - * If src_x or src_y are negative, the bad_value protocol error is raised. - * Otherwise, if the source rectangle is partially or completely outside of - * the non-NULL wl_buffer, then the out_of_buffer protocol error is raised - * when the surface state is applied. A NULL wl_buffer does not raise the - * out_of_buffer error. - * - * If the wl_surface associated with the wp_viewport is destroyed, - * all wp_viewport requests except 'destroy' raise the protocol error - * no_surface. - * - * If the wp_viewport object is destroyed, the crop and scale - * state is removed from the wl_surface. The change will be applied - * on the next wl_surface.commit. - */ -extern const struct wl_interface wp_viewport_interface; -#endif - -#ifndef WP_VIEWPORTER_ERROR_ENUM -#define WP_VIEWPORTER_ERROR_ENUM -enum wp_viewporter_error { - /** - * the surface already has a viewport object associated - */ - WP_VIEWPORTER_ERROR_VIEWPORT_EXISTS = 0, -}; -#endif /* WP_VIEWPORTER_ERROR_ENUM */ - -#define WP_VIEWPORTER_DESTROY 0 -#define WP_VIEWPORTER_GET_VIEWPORT 1 - - -/** - * @ingroup iface_wp_viewporter - */ -#define WP_VIEWPORTER_DESTROY_SINCE_VERSION 1 -/** - * @ingroup iface_wp_viewporter - */ -#define WP_VIEWPORTER_GET_VIEWPORT_SINCE_VERSION 1 - -/** @ingroup iface_wp_viewporter */ -static inline void -wp_viewporter_set_user_data(struct wp_viewporter *wp_viewporter, void *user_data) -{ - wl_proxy_set_user_data((struct wl_proxy *) wp_viewporter, user_data); -} - -/** @ingroup iface_wp_viewporter */ -static inline void * -wp_viewporter_get_user_data(struct wp_viewporter *wp_viewporter) -{ - return wl_proxy_get_user_data((struct wl_proxy *) wp_viewporter); -} - -static inline uint32_t -wp_viewporter_get_version(struct wp_viewporter *wp_viewporter) -{ - return wl_proxy_get_version((struct wl_proxy *) wp_viewporter); -} - -/** - * @ingroup iface_wp_viewporter - * - * Informs the server that the client will not be using this - * protocol object anymore. This does not affect any other objects, - * wp_viewport objects included. - */ -static inline void -wp_viewporter_destroy(struct wp_viewporter *wp_viewporter) -{ - wl_proxy_marshal_flags((struct wl_proxy *) wp_viewporter, - WP_VIEWPORTER_DESTROY, NULL, wl_proxy_get_version((struct wl_proxy *) wp_viewporter), WL_MARSHAL_FLAG_DESTROY); -} - -/** - * @ingroup iface_wp_viewporter - * - * Instantiate an interface extension for the given wl_surface to - * crop and scale its content. If the given wl_surface already has - * a wp_viewport object associated, the viewport_exists - * protocol error is raised. - */ -static inline struct wp_viewport * -wp_viewporter_get_viewport(struct wp_viewporter *wp_viewporter, struct wl_surface *surface) -{ - struct wl_proxy *id; - - id = wl_proxy_marshal_flags((struct wl_proxy *) wp_viewporter, - WP_VIEWPORTER_GET_VIEWPORT, &wp_viewport_interface, wl_proxy_get_version((struct wl_proxy *) wp_viewporter), 0, NULL, surface); - - return (struct wp_viewport *) id; -} - -#ifndef WP_VIEWPORT_ERROR_ENUM -#define WP_VIEWPORT_ERROR_ENUM -enum wp_viewport_error { - /** - * negative or zero values in width or height - */ - WP_VIEWPORT_ERROR_BAD_VALUE = 0, - /** - * destination size is not integer - */ - WP_VIEWPORT_ERROR_BAD_SIZE = 1, - /** - * source rectangle extends outside of the content area - */ - WP_VIEWPORT_ERROR_OUT_OF_BUFFER = 2, - /** - * the wl_surface was destroyed - */ - WP_VIEWPORT_ERROR_NO_SURFACE = 3, -}; -#endif /* WP_VIEWPORT_ERROR_ENUM */ - -#define WP_VIEWPORT_DESTROY 0 -#define WP_VIEWPORT_SET_SOURCE 1 -#define WP_VIEWPORT_SET_DESTINATION 2 - - -/** - * @ingroup iface_wp_viewport - */ -#define WP_VIEWPORT_DESTROY_SINCE_VERSION 1 -/** - * @ingroup iface_wp_viewport - */ -#define WP_VIEWPORT_SET_SOURCE_SINCE_VERSION 1 -/** - * @ingroup iface_wp_viewport - */ -#define WP_VIEWPORT_SET_DESTINATION_SINCE_VERSION 1 - -/** @ingroup iface_wp_viewport */ -static inline void -wp_viewport_set_user_data(struct wp_viewport *wp_viewport, void *user_data) -{ - wl_proxy_set_user_data((struct wl_proxy *) wp_viewport, user_data); -} - -/** @ingroup iface_wp_viewport */ -static inline void * -wp_viewport_get_user_data(struct wp_viewport *wp_viewport) -{ - return wl_proxy_get_user_data((struct wl_proxy *) wp_viewport); -} - -static inline uint32_t -wp_viewport_get_version(struct wp_viewport *wp_viewport) -{ - return wl_proxy_get_version((struct wl_proxy *) wp_viewport); -} - -/** - * @ingroup iface_wp_viewport - * - * The associated wl_surface's crop and scale state is removed. - * The change is applied on the next wl_surface.commit. - */ -static inline void -wp_viewport_destroy(struct wp_viewport *wp_viewport) -{ - wl_proxy_marshal_flags((struct wl_proxy *) wp_viewport, - WP_VIEWPORT_DESTROY, NULL, wl_proxy_get_version((struct wl_proxy *) wp_viewport), WL_MARSHAL_FLAG_DESTROY); -} - -/** - * @ingroup iface_wp_viewport - * - * Set the source rectangle of the associated wl_surface. See - * wp_viewport for the description, and relation to the wl_buffer - * size. - * - * If all of x, y, width and height are -1.0, the source rectangle is - * unset instead. Any other set of values where width or height are zero - * or negative, or x or y are negative, raise the bad_value protocol - * error. - * - * The crop and scale state is double-buffered, see wl_surface.commit. - */ -static inline void -wp_viewport_set_source(struct wp_viewport *wp_viewport, wl_fixed_t x, wl_fixed_t y, wl_fixed_t width, wl_fixed_t height) -{ - wl_proxy_marshal_flags((struct wl_proxy *) wp_viewport, - WP_VIEWPORT_SET_SOURCE, NULL, wl_proxy_get_version((struct wl_proxy *) wp_viewport), 0, x, y, width, height); -} - -/** - * @ingroup iface_wp_viewport - * - * Set the destination size of the associated wl_surface. See - * wp_viewport for the description, and relation to the wl_buffer - * size. - * - * If width is -1 and height is -1, the destination size is unset - * instead. Any other pair of values for width and height that - * contains zero or negative values raises the bad_value protocol - * error. - * - * The crop and scale state is double-buffered, see wl_surface.commit. - */ -static inline void -wp_viewport_set_destination(struct wp_viewport *wp_viewport, int32_t width, int32_t height) -{ - wl_proxy_marshal_flags((struct wl_proxy *) wp_viewport, - WP_VIEWPORT_SET_DESTINATION, NULL, wl_proxy_get_version((struct wl_proxy *) wp_viewport), 0, width, height); -} - -#ifdef __cplusplus -} -#endif - -#endif -- cgit v1.2.3